Component Forming Machine Automatic For Radial

Automatic Cut & Form Machine (Radials)

We offer to our clients a wide range of Automatic Cut & Form Machine (Radials). These are fabricated using high grade material and are in compliance with the industry standards. Our range finds applications in various industries and is known for its high performance, easy operation and durability.

 

Specifications:

 

• Model: CA-33
• Automatic Cut & Form Machine for Radials
• 2,000 to 2,500 radial components per hour
• Motorised
• 100 Watt, 230 Volts AC

Our range of Automatic Lead Cutting Machine comprises Automatic Cut & Form Machine for axial/radials and horizontal & vertical (VF) forming. These are manufactured using high grade material and cater to the requirements of various industries.

 

Specifications:

 

• Model: CR-22
• Automatic Lead Cutting Machine with vibratory feeder for loose and taped radial components
• 100 Watts, 220 Volts AC
• 4,000 to 7,000 components per hour

The automatic IC lead straightner offered by us has electro pneumatic machine/strips both ends. These are designed as per the industry standards and are made using quality raw material. Our range meets the international standards and is known for its sturdy design and easy operation.

Specifications:

• Model: MLS - 03/06
• 0.3 Inch DIP ICs
• 4,000 to 8,000 components per hour
• 120 Watts, 220 Volts AC
• Motorized tube to tube

This is Automatic Jumper-Link And Wire Forming Machine used in various area.

Model: JL - 20

• This is an automatic jumper linklwire forming machine capable of forming a right angle cut-and bend jumper-link and other wire forms with a pitch length size control spanning from 2mm to 40mm. (Other size range on request).
• The bare tinned-copper -wirelwire is de-reeled from the spool using a special De-reeling device and then fed to the wire straightner.
• The wire is straightened in two planes and then passed through the feed unit. The feed unit meters the wire length as per the jumper wire /size set on the feed unit. The wire is then conveyed to the cut & form die-module, which operates as soon as the desired length of wire has been fed to it.
• The machine is capable of forming 3500 jumper links/formed wire per hour. Change-over from one size to the other takes just two minutes. The universal tool-set caters to the entire range of pitch size from 2 to 25mm.
• The bend angle can be varied from 100 to 90 through adjustment of tools. The machine exercises a very tight tolerance of:!: 0.5% on the length of one of the bent legs/total lenght.

Automatic Pneumatic Jumper Link Forming Machine
Model: JL-30P

Automatic pneumatic jumper link forming machine. Complex wire forms/geometry. 100 watts, 220V AC. 2-70 mm length, 2,500 – 5,000 pcs/hrs.