Send Email
Send SMS
Search
Control Signals


Component Preparation

Manufacturers & Suppliers of a wide range of products which includes CM-01K" Universal" Cut, Bend & Kink for Axial, Model: CM-01 " Universal' Manual Cut & Form Machine, Model: CM-02 High Speed Cut & Form Machine For Axials, MODEL: CA-11, MODEL: CA-11-TF-R :, MODEL CA-33 & CA-33X and many more items from India.

Model: CM-02 High Speed Cut

REQUEST CALLBACK

Model: CM-02 High Speed Cut
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 10,900 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Automatic GradeAutomatic
ConditionNew

This is a hand operated, high speed cut form machine dedicated for processing axial components, right from 1/8 watt to 2 watt resistors and other devices in this range.

This is a table-top mountable machine capable of handling both, loose and taped, components. Rotation of the hand lever transports the device from the chute / tape guides across the cutting and bending stations preforming the device to a right angle cut bend geometry. Manufactures of Axial Forming Machine,Cutting Machine Tools India,Forming Machine Tools Delhi,Leads Cutting Machine

High-speed-steel pick-up wheels and tool-set provide an almost infinite tool-life to the machine. The machine is fully adjustable for different pitch sizes with standard cut-to bend length. Change-over from one components geometry to the other takes just 5 minutes, making it ideal for production on lot basis.

A unique feeding system is the heart of the machine, providing trouble-free feed of components from the feeding chute to the machine.

Production Rates*:

4,000 - 7000 Components/Hr-Loose feed.

16,000-20,000 Componets/Hr-Tape feed.

Drive : Rotary Hand-Lever

* Dependent on the efficiency/speed of the operator.

Yes! I am Interested

Model: CR-22 Automatic Lead Cutting

REQUEST CALLBACK

Model: CR-22 Automatic Lead Cutting
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 37,500 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Capacity5, 000 to 20,000 components/HR

AUTOMATIC LEAD CUTTING, MACHINE WITH VIBRATORY FEEDER FOR LOOSE TAPED RADIAL COMPONENTS 

MODEL: CR.22 : Is an automatic lead cutting machine for Loose and Taped Radial components. The machine employes a vibratory track feeder to trasportlconvey loose radial components from the loading end to the rotory lead cutting section and then to the un-loading end of the vibratory track.

The conveying speed is controlled by varying the amplitude of the vibratory track through the power-pack supplied with the machine .The lead length to be cut can be easily adjusted and set by using suitable track spacers supplied with the machine.

For Taped Radials, the tape is inserted through the track and the cutting rollers pull and cut the leads with slight assistance of the operator.

The machine can cut 5,000 to 20,000 components per hour in LooselTape-feed depending on the efficiency of the operator, who has to hand place loose components as fast as he can, at the loading end of the vibratory track.

SPECIFICATION

Power 60 watts. 220V AC.

Production capacity 5, 000 to 20,000 components/HR.

Feed-type Loose/Taped Radials.

Dimensions 380 x 450 x 225. (L x W x H).

Yes! I am Interested

MODEL: CA-11

REQUEST CALLBACK

MODEL: CA-11
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 24,800 / PieceGet Latest Price

This is an automatic cut form machine dedicated for processing Axial components, right from 1/8 watt to 2 watt resistors and other devices in this range. This is a table-top machine capable of handling both, loose and taped components. A special geared motor serves as the drive for the cut-form operation.

High-Speed-Steel pick-up-wheels and tool-set provides an almost infinite tool-life to the machine. The machine is fully adjustable for different pitch size and cut-to-bend lengths. Change-over from one component geometry to the other takes just 5 minutes, making it ideal for production on lot basis.

A unique loose feeding hopper system is the heart of the machine, providing a trouble-free feed of components from the feeding hopper to the machine

For changing over from loose-feed to Tape-feed (axails), one has to simply interchange the loose-feed tool module to Tape-feed tool module. (CA-11-TF/M), Or replace the hopper feeding system with Tape-feeding system


Additional Information:

  • Minimum Order Quantity: 1 Piece
  • Yes! I am Interested

    MODEL: CA-11-TF-R :

    REQUEST CALLBACK

    MODEL: CA-11-TF-R :
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Is a motorised machine to cut (Plain-cut) radial taped-components from the tape. The taped components are trasported across the cutting station by a transport-drum and the pick-up-wheels. The cut components then drop down into the bin. This can be bought as an independent machine or as anattachment (module) with MODEL: CA-11-LF.

    All CA-11 Series of machine employ the same drive where various tool-modules can be inter-changed hence one can use one basic drive with different modules and save cost at a higher work flexibility.

    Production Rates*:

    4,000 - 7000 Components/Hr-Loose feed.

    16,000-20,000 Componets/Hr-Tape feed.

    Drive : Geared Motor-230Voperation

    Power Requirements: 100 watt (max), 230V AC, single phase

    Dimensions (L X W X H) : 500 X 160 X 300 MM

    * Dependent on the efficiency/speed of the operator.


    Additional Information:

  • Minimum Order Quantity: 1 Unit
  • Yes! I am Interested

    Model: LS-30/LS-60 IC Lead Straightener

    REQUEST CALLBACK

    Model: LS-30/LS-60 IC Lead Straightener
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    ModelLS-30,/LS-60

    MODEL: LS-30,/LS-60, DIP IC-Iead straightner, is a high productivity component preparation equipment use-ful for processing DIP ICs for direct insertion of the same into the PCB.

    It is a bare necessity for densely populated PCB assembly using 0.3 Inch and 0.6 Inch DIP ICs ranging from 4 pin to 68 pin packages.

    The ICs as-supplied by the manufacturer in the IC tubes are ment for assembly into IC-sockets/PCB using dispensing tools.

    Manual assembly into the PCB is very difficult without forming, making it a very tideous, time consuming and hazardous (both for the device and the operator) operation.

    Model: LS-30/LS-60, forms the device to the desired' grid/PCB pitch by means of rotory forming rollers.

    The machine employs tube-to-tube, input and output feed of unformed/formed ICs.

    The ICs are conveyed through the two pairs of forming rollers by sliding them down, manually (using the Index finger), the ICs are formed as per the desired pitch size.

    The forming is done progressively by two roller pairs.

    The forming pitch/pattern can be adjusted in seconds (to suit the PCB pitch).

    Features

    Production 2,000 to 5,000 components/HR.

    Drive Manual, Hand-operated

    Dimensions(LxWxH) (250 x 150 x 200 mm )

    Yes! I am Interested

    Model : MLS-03/06 Automatic IC-Lead Straightener

    REQUEST CALLBACK

    Model : MLS-03/06 Automatic IC-Lead Straightener
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    ModelMLS-03/06

    DIP IC-LEAD straightner, is a high productivity component preparation equipment useful for processing DIP ICs for direct insertion of the same into the PCB.

    It is a bare necessity for densely populated PCB assemblies using 0.3 Inch and 0.6 Inch DIP ICs ranging from 4 pin to 68 pin packages.

    The ICS as-supplied by the the manufacturer in the IC tube are ment for assembly into IC-Sockets/PCB using dispensing tools.

    Manual assembly into the PCB is very difficult without forming, making it a very tideous, time consuming and hazardous (both for the device and operator) operation.

    Model: MLS-03/06, forms the device to the desired grid/PCB pitch by means of rotory forming rollers. The machine employs tube-to-tube, input and output feed of unformed/formed ICs.

    The top conveyor integrated into the machine transports the device from the input to 4,000-10,000 component /Hr. the output tube and through the forming rollers.

    The formed pitch/pattern can be adjusted in seconds (to suit the PCB pitch) and tooling change- over, for 0.3 inch to 0.6 inch IC package takes just two minutes.

    Features

    Production 4000-10,000 components/Hr.

    Power Requirements 120 watt (Max) 220V AC

    Dimensions(LxWxH) 300 x 250 x 200

    Yes! I am Interested

    Model: ICF-100 Pneumatic DIP-IC Forming Machine

    REQUEST CALLBACK

    Model: ICF-100 Pneumatic DIP-IC Forming Machine
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    MODEL: ICF-100:- Is an automatic, tube-fed, DIP-IC lead cutting and forming machine to form DIP ICs for SMD mounting or stand-off or lock-in mounting.

    This Air-operated machine carries out the cutting and forming of the DIP-IC on both the lead-rows, simultaneously, across a common forming anvil.

    The ICs are fed to the unit from the tube and first reach the cutting station, where the two lead-rows are cut simultaneously as per the form requirment (the IC is hand-pressed from the top for proper seating on the feed-track cum cut-form anvil).

    After the cutting process/station the device is transported (by sliding it down on the anvil by the finger) to the forming/lead bending station where both lead rows are formed simultaneously.

    The machine is actuated through a foot-pedal switch by the operator for each forming operation (both cutting and forming cycles are performed simultaneously at the two stations).

    Features

    Power 50 watts, 220V AC.

    Air -Supply 1.5 to 2 cfm @ 60 psi, filtered lubricated

    Production Rates 1000-2000 components per hour (as per operator Efficiency).


    Additional Information:

  • Minimum Order Quantity: 1 Unit
  • Yes! I am Interested

    Model: CM-01K" Universal" Cut, Bend & Kink for Axial

    REQUEST CALLBACK

    Model: CM-01K Universal Cut, Bend & Kink for Axial
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    This versatile hand operated machine is dedicated for the "Cut- Bend- Kink" operation for axial devices ment for Horizontal or Vertical mounting.

    .

    A wide variety of forms/geometries can be formed using this dual lever machine. The component is formed at one tool-station with serial operation of the two levers. The component pitch and stand-off height can be adjusted with the same tool-set.

    Stand-off, lock-in, snap-in-Horizontal/ Vertical geometries can be processed by using suitable tool-set.

    Various tool-sets are available (optional) to form various form geometry. The machine can process all components from 1/8 watt to 5 watt resistors, in various forms. A special version of the machine is available for thick-lead devices (upto 1.5 mm head dia.) on special request and price. A minimum tool-life of 2 million operations between regrind is guaranteed.

    Production Rates:
    800 - 1200 Components / hr.

    Drives: Dual Hand-lever


    Additional Information:

  • Minimum Order Quantity: 1 Unit
  • Yes! I am Interested

    Model: CM-01 " Universal' Manual Cut & Form Machine

    REQUEST CALLBACK

    Model:  CM-01  Universal' Manual Cut & Form Machine
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    This is a multipurpose machine suitable for a wide variety of perations that are required to produce a quality PCB assembly.

    10 mm thick structural plates, sealed ball-bearings and precision ground tool-set provide the machine the robustness and accuracy demanded by the critical cutting & forming operation.

    A special grade Tool - steel and involved heat- treatment process guarantees a tool - life of minimum 5 million operations between regrind.

    Standard Toolings /Jigs are available to perform the following operation:

    (a) Cut & form for Axials - Horizontal/ Vertical/ Stress relief geometry.

    (b) Cut & form for radials.

    (c) Cut & form for Transistors & Multi-lead components.

    (d) Jumper links (bare-wire or insulated).

    Production Rates:

    1,000 - 1,500 Axial/radial components/hour. 2,000 - 2,500 Jumper links/hour.

    * Dependent on the efficiency/speed of the operator.


    Additional Information:

  • Minimum Order Quantity: 1 Unit
  • Yes! I am Interested

    MODEL: CA-11

    REQUEST CALLBACK

    MODEL: CA-11
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Series of machines are equipped with quick set tooling making pitch adjustment simple and fast. The machine is powerd with a reversible motor to remove improperly fed components and tape. A special version of the machine, MODEL: CA-!!-TF (TL) is available for processing thick-lead components upto 1.5mm Dia. Leads. A different version of the machine can be used for components counting and tape marking after every 100 component count, without damaging the components. This is a very handy equipment for despensing at component stores.


    Additional Information:

  • Minimum Order Quantity: 1 Unit
  • Yes! I am Interested

    MODEL CA-33 & CA-33X

    REQUEST CALLBACK

    MODEL CA-33 & CA-33X
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    MODEL: CA-33 CA-33X, Are a versatile range of cutting forming machines dedicated to radial components.

    A wide variety of cut form geometries can be processed on this machine: VIZ Plain cut, lock-in kink, stand:off-kink, Snap-in, pitch expansion, in-plane kinking and other forming operation.

    MODEL: CA-33X : Is dedicated to all cutting and forming operation which are in the lead plane (in-plane kinking, expansion and kinking of transistors).

    The components are fed one by one (by hand) into the machine for preparation. The reciprocating Die-set then cuts forms the component as per the form on the tool-set. For change-over from one form geometry to the other the die-set can be replaced as per the form desired. While ordering please specify the form and enclose a dimensioned drawing of the form desired.

    Production Rates*: 2,000-2,500 Radial components/hr.

    Drive Motorised (Fixed speed of operation or adjustable by using CA-33 T, Timing module).

    Mode of operations Automatic/Manual

    Power requirements Motorised; 100 watts, 230V ac, 50 HZ.

    Dimensions 470 x 160 x 250 mm


    Additional Information:

  • Minimum Order Quantity: 1 Unit
  • Yes! I am Interested

    MODEL: CA-10

    REQUEST CALLBACK

    MODEL: CA-10
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    AUTOMATIC CUT, BEND KINK MACHINE FOR AXIALS

    This is an automatic Cut, Bend Kink machine dedicated for processing Axial components, right from 1/8 watt to 2 watt resistors and other devices in this range.

    This is a table-top machine capable of handling taped components. Special geared motors serve as the drive for the cut / form operation.

    High-Speed Steel pick-up-wheels and tool-set provides an almost infinite Tool-life to the machine. The machine is fully adjustable for different pitch size with a particular Bend and Knik geometry. Change-over from one component geometry to the other takes just 30 minutes, making it ideal for production on lot basis.

    A unique feeding system is the heart of the machine, providing a trouble-free feed of components to the machine.

    The machine is tailored to the form geometry desried. For change from one kink-shape to the other, different tool modules/sets can be supplied. Adjustment of pitch can be accomplished with the same tool-set.

    SPECIFICATION

    Production Rates 3000-3500 components/hr-Tape-feed

    Power Requirements 100 watt (Max) 220V AC, Single phase.

    Dimensions(LxWxH) 450 x 300 x 300 mm


    Additional Information:

  • Minimum Order Quantity: 1 Unit
  • Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Control Signals
    R. S. Bartwal (Partner)
    N-91, Sector 1, D. S. I. D. C. Bawana Industrial Complex, Bawana,
    New Delhi - 110039, Delhi, India
    Call Us: 
    Call Response Rate: 46%
    Share Us :
    F G T L



    Home  |   About Us   |  Products We Offer  |  Site Map  |   Contact Us

    © Control Signals. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Control Signals